مشکل با encryption در vpn

[alieblice]

سلام
من روی debian 5 طبق اموزشی که قسمت مقالات بود ((آموزش تصویری راه اندازی VPNسرور لینوکس توسط POPTOP در دبین)) . vpn سرور ساختم و به درستی کار میکنه فقط encryption نداره حالا می خوام encryption راه اندازی کنم
لطفا راهنمایی کنید

[webgard3]

پیش فرض داره.
توی فایل کانفیگش خط use MPPE128 رو کامنتشو پاک کن.
فکر کنم اسم فایلش chap.options باشه

[alieblice]

من داخل این فایل etc/ppp/pptpd-options دنبالuse MPPE128 ولی نبود برای همین تمام خطایی که MPPE داشتن دونه به دونه کامنتشون ‍‍باک کردم و تست کردم ولی هیچ بار وصل نشد
مطن داخل pptpd-options حالا کامنت کدوم خط باید بردارم

################################################## #############################
# $Id: options.pptpd,v 1.9 2005/08/02 11:33:32 quozl Exp $
#
# Sample Poptop PPP options file /etc/ppp/options.pptpd
# Options used by PPP when a connection arrives from a client.
# This file is pointed to by /etc/pptpd.conf option keyword.
# Changes are effective on the next connection. See "man pppd".
#
# You are expected to change this file to suit your system. As
# packaged, it requires PPP 2.4.2 and the kernel MPPE module.
################################################## #############################


# Authentication

# Name of the local system for authentication purposes
# (must match the second field in /etc/ppp/chap-secrets entries)
name pptpd

# Strip the domain prefix from the username before authentication.
# (applies if you use pppd with chapms-strip-domain patch)
#chapms-strip-domain


Encryption
# (There have been multiple versions of PPP with encryption support,
# choose with of the following sections you will use.)


#BSD licensed ppp-2.4.2 upstream with MPPE only, kernel module ppp_mppe.o
#{{{
refuse-pap
refuse-chap
refuse-mschap
#Require the peer to authenticate itself using MS-CHAPv2 [Microsoft
#Challenge Handshake Authentication Protocol, Version 2] authentication.
#require-mschap-v2
#Require MPPE 128-bit encryption
#(note that MPPE requires the use of MSCHAP-V2 during authentication)
#require-mppe-128
# }}}


# OpenSSL licensed ppp-2.4.1 fork with MPPE only, kernel module mppe.o
#{{{
#-chap
#-chapms
#Require the peer to authenticate itself using MS-CHAPv2 [Microsoft
# Challenge Handshake Authentication Protocol, Version 2] authentication.
#+chapms-v2
#Require MPPE encryption
#(note that MPPE requires the use of MSCHAP-V2 during authentication)
#mppe-40 # enable either 40-bit or 128-bit, not both
mppe-128
#mppe-stateless
# }}}


# Network and Routing

# If pppd is acting as a server for Microsoft Windows clients, this
# option allows pppd to supply one or two DNS (Domain Name Server)
# addresses to the clients. The first instance of this option
# specifies the primary DNS address; the second instance (if given)
# specifies the secondary DNS address.
#ms-dns 10.0.0.1
#ms-dns 10.0.0.2

# If pppd is acting as a server for Microsoft Windows or "Samba"
# clients, this option allows pppd to supply one or two WINS (Windows
# Internet Name Services) server addresses to the clients. The first
# instance of this option specifies the primary WINS address; the
# second instance (if given) specifies the secondary WINS address.
#ms-wins 10.0.0.3
#ms-wins 10.0.0.4

# Add an entry to this system's ARP [Address Resolution Protocol]
# table with the IP address of the peer and the Ethernet address of this
# system. This will have the effect of making the peer appear to other
# systems to be on the local ethernet.
# (you do not need this if your PPTP server is responsible for routing
# packets to the clients -- James Cameron)
proxyarp


# Logging

# Enable connection debugging facilities.
# (see your syslog configuration for where pppd sends to)
#debug

# Print out all the option values which have been set.
# (often requested by mailing list to verify options)
#dump


# Miscellaneous

# Create a UUCP-style lock file for the pseudo-tty to ensure exclusive
# access.
lock

# Disable BSD-Compress compression
nobsdcomp

# Disable Van Jacobson compression
# (needed on some networks with Windows 9x/ME/XP clients, see posting to
# poptop-server on 14th April 2005 by Pawel Pokrywka and followups,
# http://marc.theaimsgroup.com/?t=111343175400006&r=1&w=2 )
novj
novjccomp

# turn off logging to stderr, since this may be redirected to pptpd,
# which may trigger a loopback
nologfd

# put plugins here
# (putting them higher up may cause them to sent messages to the pty)

[alieblice]

سلام
خیلی تعجب می کنم یعنی کسی از دوستان در مورد ..... اطلاعاتی ندارند

[admin]

راهنماییتون که کردن